Steel Plate for Pad Printing Machine

Usage: 
Used by Open-ink tray pad printer. Design and drawing document etched on the surface of pad plate . Installed it to the pad printer. 

Technical Parameter:
1. Thickness:10.0mm;
2. Roughness concentration of Surface:0.025
Production Advantage :High strength Bearing steel wrought; High wear resistance; Sophisticated structure to be etched fine imaging both streak and halftone;long life ensure low cost. 

Use Method:
1. Etching printing document to the surface of pad plate;
2.Measure the depth ;
3.Install into the ink tray of pad printer
4.Testing after adding ink
Safe Caution:Be careful to carry because of weight 

Storage:
Inject rust-preventative oil into the surface of pad plate;
PVC or Nylon film package
Store in drying and shady place

1.All plates are made of imported steel, high hardness, high density and high brightness.
2.Can be etched with high-definition pattern, long using life.
3.Various kinds, full range that covering plates of single side and both sides.