Polymer plate for hot stamping-water washable

Product Description:
 
This photopolymer plate has two layers: the upper layer is photopolymer plate about 0.03 inch thickness,part of it will solidify after UV exposure , while the rest part without exposure can dissolve in the water. The lower layer is aluminum plate, about 0.008 inch thickness.

High thermal conductivity and pollution free 

Heat resistant up to 280 C

Simple plate making process in short time 

Relief: 0.026" (0.68mm) 

Base: 0.008" (0.32mm)

Net weight:0.5Kg/piece